This arched top louver vent was manufactured in architectural bronze.
Tombstone Louver Vent
Then trimmed with a rounded aluminum brick mold in white.
Tombstone Louver Vent
Then trimmed with a rounded aluminum brick mold in white.
From here the 2 inch depth is visible.
The base was angled to match the 5/12 roof pitch provided.
The base was angled to match the 5/12 roof pitch provided.
Carrying the same brick mold trim all the way around the curvature of the top.
And recessing the vent 3/4 inch back giving a more detailed and realistic appearance.
Better Aluminum Tombstone Attic Vent
| Vent Size | receive | receive | apx | |||
| if you choose... | order width | order height | vent width | vent height | net free | |
| opening size | 36 | 48 | 35.5 | 47.5 | 724 | |
| tip to tip of vent | 36 | 48 | 36 | 48 | 742 | |
| tip to tip including flange | 36 | 48 | 33 | 45 | 633 |
Depth: 2inch vent wall
Finish Color Options: All Sheet Metal
Nailer Type: Front Flange
Composed Of: .019 Aluminum
Functional Options: Aluminum, 1/2 inch wired mesh, Vinyl screening on back, Non vented
Get 36 X 48 X 2 Tombstone vents for the correct 36 x 48 louvered vents with a front flange and a 2 inch depth
The Tombstone louvered vent is simply a square with a curved top. The top usually captures every bit of possitive attention. How to measure for a Tombstone vent is quicker than one could imagine. Just ignore the angling top and focus your mind to the rectangular shape of the vent. The wide measure, the side leg height and the total center height are the only measures needed to obtain these 36 x 48 tombstone front flange vents and be sure it will slip in easily and right.
36x48x2tslvffss
These vents may not be appreciated as much upon the order. But when the neighbor is replacing their vent again and you are not, then just kick back, relax and watch. You have earned it.
Custom Louver Vents Done Your Way
901.281.2887 contactus@onyxxteriors.com