At 30 1/2 x 24 3/4, this custom louver was ordered for an opening size of 31 x 25 1/4.
For opening size, the vent will be reduced 1/4 inch per side.
This ensures the wood framing doesn't hug the vent too tight.
See a
Square attic exhaust vents
When matching a painted house color, it's suggested to order primed white.
It's the easiest finish to paint.
Whether as an intake vent or exhaust vent, this size can be used in many areas.
The vent wall is a full 2 inches deep.
This allows the slats to be an inch and a half apart for better ventilation.
Finally, just choose the screen needed for the back of the vent.
See a 30 X 24 X 2 Square vent in this vent department of Onyx Xteriors 30 x 24 attic exhaust vents with a front flange and a 2 inch depth
Put any damaged square vinyl vent in the grave with a real aluminum vent for a lifetime of beauty. 30x24x2sqlvffss
These will be delivered right to your job site.
This order went to Orlando Florida 32806
It's the easiest finish to paint.
Whether as an intake vent or exhaust vent, this size can be used in many areas.
The vent wall is a full 2 inches deep.
This allows the slats to be an inch and a half apart for better ventilation.
Finally, just choose the screen needed for the back of the vent.
A Reinforced Aluminum Squared Garret Exhaust Vent
| Vent Size | receive | receive | apx | |||
| if you choose... | order width | order height | vent width | vent height | net free | |
| opening size | 30 | 24 | 29.5 | 23.5 | 295 | |
| tip to tip of vent | 30 | 24 | 30 | 24 | 308 | |
| tip to tip including flange | 30 | 24 | 27 | 21 | 237 |
Depth: 2 inch deep
Color Coating Options: All .019 Aluminum Sheet Metal Colors
Flange Type: Front Flange
Manufactured With: Complete Aluminum Sheet Metal
Screen: Aluminum, Metal backing, Vinyl screen, Wired mesh
These will be delivered right to your job site.
This order went to Orlando Florida 32806
What else?
901.281.2887 contactus@onyxxteriors.com