9 X 25 X 1 Square Front Flange Crawlspace Exhaust Vent

A beautiful shade of Forest Green on this rectangular louver attic vent.

Get these

The front flange vents are already trimmed out as a finished product.

With mitered corners,

there is no need to fight with wooden trim to cover.

The front nail fin covers a full 1 1/2 inch,

all the way around the vent.

On a 1 inch deep vent,

only 1 inch of the vent will protrude through the wall.

Meaning that studs will not need cut.

In most cases, only the wall sheathing.

Attic louvers of rectangular shape can be placed in a gable wall at any height.

And can be used as a conventional ehaust vent,

or as a fresh air intake vent.

By allowing the total customization of every vent part,

these attic vents reuire less time to install.

Without required onsite modifications to the gable wall,

or additional trimming needed,

these are the easiest and quickest to install.

Screening options are also available.

Design the custom vent to fit the gable wall opening needed.

Reinforced Squarish Louver Vent

Vent Size			receive	receive	apx
if you choose...	order width	order height	vent width	vent height	net free
opening size	9	25	8.5	24.5	73
tip to tip of vent	9	25	9	25	80
tip to tip including flange	9	25	6	22	40

Depth: 1 inch

Finish Color: Any Coil Color

Fin: Front Flange

Fabricated Of: Complete Aluminum Sheet Metal

Functioning: Aluminum, Vinyl screen, Solid aluminum back, Black aluminum screen on back

Get these 9 X 25 X 1 Square vents for the best fitting 9 x 25 crawlspace exhaust vents with a front flange and a 1 inch depth

Replace any drooping square vinyl vent with a real aluminum vent for a lifetime of protection. 9x25x1sqlvffss

Most architechs understand the distinction of a decent commodity and a poor piece of rubbish.

Now residing in Cincinnati Ohio 45246 for added attic

protection from stale air deminishing rafters and overheated roof.

What else?

Call, text or email us for a personal answer.

901.281.2887 contactus@onyxxteriors.com