Certain Teed Pewter Gray appears similar to primer gray.
Slats for this 2 inch deep vent are set 1 1/2 inches apart.
Cathedral vents are a square bottom with a gabled top.
Get a free quote on a Cathedral Attic Vent to your specifications.
This vent is a flush wall mount for outside.
Or an inside attic mount for back nailing.
The vent extends out 2 inches from the wall.
Can be used for multiple purposes.
The rear shows the bug screen and the half inch wire mesh for 4 legged critters.
This will protect from most all intruders.
The Best Metal Angle Topped Crawlspace Vent
| Vent Size | receive | receive | apx | |||
| if you choose... | order width | order height | vent width | vent height | net free | |
| opening size | 38 | 30 | 37.5 | 29.5 | 439 | |
| tip to tip of vent | 38 | 30 | 38 | 30 | 453 | |
| tip to tip including flange | 38 | 30 | 35 | 27 | 371 |
Depth: 2 inch thick
Colour: All .019 Sheet Metal
Type of Nail Fin: Back Flange
Manufactured Of: .019 Aluminum
Screening Options: Aluminum, Vinyl screen, Metal backing, Wired mesh
A Cathedral louvered crawlspace vent is a simple box and a slanted top. These vent tops often snug up to the angled pitch of the rooftop. Measures the gable topped vent is much quicker than one could have thought. Forget about the top and put your mind to the rectangulared majority of it. The horizontal measure, up the side and the overall center height are the measurements wanted to buy one of these 38 x 30 cathedral back flange vents and be certain it will fit without modifying the vent.
38x30x2ctlvbfss
Bring simple style to any building with the assistance of Onyx Xteriors louvered metal exhaust vents built from aluminum featuring an unfading UV protected coating.
What else?
901.281.2887 contactus@onyxxteriors.com